Daily Sculptors Page

Join the conversation and share your paper mache sculptures with our supportive community.

No artwork to share today? That’s OK, too… We’d love to hear from you. Just scroll down to the bottom of this page and use the comment form.

The latest photos from our readers:

14,783 thoughts on “Daily Sculptors Group Page”

  1. Jonni, and whoever has suggestions! , I was researching on this site about painting fur, an in watching the raccoon video, I saw you use Apoxie Sculpt. I’m thinking of ordering some for my next project. Does it work well on the clay? and does it paint well and blend in? Any problems or suggestions you might have?

    There is an encyclopedia of knowledge here and I wish I had a photographic memory!

    • There is a modeling compound and a repair compound. Which is the better one? if at all? Any more videos here I might watch about using it? Or other suggestions?

      • Apoxie Sculpt, the modeling compound, is the one I’ve used. I made my gnome’s face with it, and that’s what your chicken was made with. I didn’t know they had a repair compound until you mentioned it, and Amazon’s sales page doesn’t explain the difference – except that it’s more expensive. You can fix things with the modeling compound, too, so I don’t see why the “fixit” version would be needed.

    • Hi Rex. The epoxy clay I used for my rooster is almost the same as the Apoxie Sculpt. They both stick to just about anything, so they work well with dried air dry clay or paper mache clay. It has no texture of its own, though, so it works well for noses – but if you need it to duplicate a fur pattern, you’d need to work a little harder to get it to blend in.

      • Thank you. That helps a lot. I’m going to order some and give it a try. I don’t venture far from what I do because I get side-tracked easily, but I want to make something with a beak, eyes, claws, etc., and as I saw you work on your rooster, it looked really cool.

        I love your gnome and may try one later. A neighbor down the street is passionate about them. (They own a car shop and picked up my car and serviced it about a month back. Really nice. Have known them for 7 years.)

        • By the way, I have some turtles (large ones) that the neighbors bought me from Mexico. They are getting a little beaten up. Would I be able to put a little Apoxie on them and then repaint? Just thought of that as I went out the door for a walk.

          • Rex, I’m sorry it took so long to respond – I seem to be a little disorganized lately. But the answer is yes, the epoxy clay should stick to the fired clay. If you get some to use for other projects, test it on a hidden spot first, though, to make sure it will work. After I made my gnome with an epoxy clay face and waterproof grout for the rest of it, Eileen mentioned that different materials expand and contract at different rates with changes in temperature, and she wondered if that could cause the connection points between the two materials to fail. I don’t know the answer to that yet (gnome is still doing fine) but it’s worth a try. Good luck with it.

            • Thanks, Jonni. It’s a little difficult for me to expand into any new areas, but your rooster is pushing my limits! That’s a thank you. Head problems keep me from getting much done, but I did order some.

  2. Hi all. A question about the drywall joint compound for making the Paper Mache Clay Recipe.
    I am from the UK and understand it can be called joint filler. I have been looking on the DIY Shop Website and I’m not sure what to buy. There is one from Wickes which is called “British Gypsum Gyproc Ready Mixed Joint Cement”. This however is in a big 12 litre tub and is expensive. Can someone direct me as to the correct product to buy in the UK which they have used successfully as I don’t want to buy the wrong thing.
    Kind regards

    • Hi Jackie,
      You need ready mixed decorator’s filler. I use the cheapest one I can find from the poundshop. You get 750ml for £1. Think decorator’s filler, pollyfiller etc. rather than drywall compound.

  3. I am wondering about the fur direction on the giraffe. I think it goes forward on the bridge of the nose, but having a tough time figuring out the direction on the cheek area and forehead. And sides of nose. Does everything go forward on the nose.

  4. I made a paper mache person for my front porch….(three layers- paper mache, toilet paper glue and gesso) Then two coats of primer, 2 coats of flesh colored paint, and then two cOats of something (varnish, polyurethane or something) and she has been out on the Covered porch all summer for the last four years and is in excellent Shape. I cannot remember what I used for the last coats of product to protect her from The elements. I have just finished another person to sit with her and need to pick a weather protectant for her. Has anyone made a sculpture that they have put on their roofed porch and had good weather protection? What did you use, or what would you recommend. Most products say for use on wood, or interior, that isn’t what I want. Any thoughts anyone? Thanks for listening…..

    • That depends on so many variables that you really need to test it for yourself. It depends on the humidity in the air, how much air is moving, how thickly the paste has been applied, etc. If you dry one layer at a time, remember that the second and third and all new layers will be wet, and will soak into the dry layers underneath – so the first layer will dry faster, and the next ones will take longer.

  5. Jonni Beautiful work. Thanks for posting you’re link. That Snowy Owl is beautiful and I’m going to try it. The rest of the animals are beautiful too.

    With your encouragement I’m going to post my work. Thank you for the invitation. I make Wall pockets with clay. I use white, terra cotta and porcelain clay. Thank you for your patience. I’ll get these loaded and post them. Thank you..

  6. Hi Jonnie. I am about to start the life size baby elephant project using strong cardboard instead of plywood as you said it’s not so heavy. Would you suggest using cardboard for the legs as well and then the 2” x 4” pieces of wood as spacers, would that work? Really excited and looking forward to the challenge, as it’s my first Papier Mache project after watching your videos. I took your advice and contacted my local newspaper office and they gave me a ‘sack truck’ of unsold newspapers for a few dollars, enough to make a full sized adult elephant!!!

    • Hi Sue. Yes, if you squish the paper fairly tight when you add the stuffing on the legs, the cardboard should be plenty strong enough to hold up your elephant. I hope you’ll show it to us when it’s done! 🙂

  7. Hi Jonni,

    I just happened on your site while looking for paper maché sculpture.
    Thank you so much for sharing your knowledge with the world!
    I have a realistic human face project and I know your site is going to be of great help! I’m a sculptor, ceramist and art teacher from Belgium.
    Thanks again and I once I get started I’ll share with you what I have done! 🙂

  8. Hi, Jonni and friends…it’s been a while since I posted., but I have been visiting often. I was going to try making that adorable chicken, but I don’t have any newspaper. I stopped delivery when I couldn’t read it. I have a lot of used computer paper and wonder if there is any way that could be used.
    Like always when I am searching for something to do this poem popped into my head so I thought I would share it. By the way, your daughter looks so much like you. She has a lovely site.

    For you

    If I could paint a picture
    To brighten up your day
    I’d paint some happy children
    Laughing at their play

    I’d paint the look on a mother’s face
    As she holds her newborn child
    Or I’d paint a field of flowers
    Growing beautiful and wild

    I’d try to paint a sunbeam
    Or the drops of a springtime rain
    Or the delicate, lacy fingers of frost
    On a winter windowpane
    I’d also really like to try
    To paint a misty rainbow
    As it arcs across the sky

    I’d paint a tiny kitten
    As it frolics on the rug
    And then I’d paint a kiss or two
    And then I’d paint a hug

    I’d paint these images for you
    Though it might take a while
    But it would be so worth it
    If I could make you smile.

    • What a beautiful poem, Joyce. Thank you so much for sharing it. And yes, copy paper works just fine. I hope you have fun with your chicken – and does this mean you’re feeling better?

      • Thanks, Jonni…I have good days and some not so good. On the good ones I think I can get started creating again, but unfortunately they are few and far between. But I have hope and one day I’ll see when I can do with that computer paper. In thr meantime I’ll write poems.

  9. I know there are lessons here on adding one-ply towels to make elephant skin, but I can’t find it. Anyone help me? I’m almost ready to try it. Thanks.

    • Hi Rex. I just did a search for a tutorial I may have done, but the only thing I could find were projects where the paper towels were discussed as part of the project. Nothing specifically for making elephant skin except for the first video on this page, starting at about the 2:15 mark. It can be done in several ways, but for the wall elephant I used a thin layer of paper mache clay that had more glue in it than usual, laid the towel on top, and squooshed it around to make wrinkles. This works on a large sculpture but could add too much thickness for something that’s smaller. Another way that works well is to just mix up some regular flour and water paste, or the “DIY gesso” mix with about equal parts of joint compound and glue. Brush it on the dry paper mache clay or dip the paper towel pieces into the paste, lay it on the sculpture and move it around in the spots where wrinkles are needed. In this method the “skin” is paper thin. If you use the gesso you can brush a little on top of the paper to give you a nice hard surface for paint.
      We can’t wait to see your elephants!

      • I believe I heard the paper towel idea for the baby elephant lessons. Because the bumpy paper towels make good “skin”

  10. Hello, we have bought the giant bullfrog trophy head and were wondering if there are step by step instructions for this please for my daughter and I to follow? Many thanks Justine

    • Hi Justine. There are two videos here that show you how the bullfrog goes together, and how to finish it. The pieces are all numbered, and their placement is shown on page 2 of your pattern. I hope this helps – let me know if you have any more questions. 🙂

  11. So Jonni. what is the verdict on the clay made without joint compound? Does it need refrigeration, how is it with mold, how long can you store it???


Leave a Reply to Eileen Cancel reply

Heads up! You are attempting to upload an invalid image. If saved, this image will not display with your comment.

Heads up! You are attempting to upload a file that's too large. Please try a smaller file smaller than 250KB.

Note that images greater than 250KB will not be uploaded.